Mengganti Template Blog

Posted on Updated on

Agar blog meningkat terrificnya, salah satunya dengan cara mengganti template yang unik dan relevan dengan isi blog.

Berikut situs-situs penyedia template blog :


    Silakan brad n sist eksplor agar dapat html codenya

    Setelah menemukan template yang cocok, copy HTML nya. 
    Blog > Rancangan > edit html > edit template htm

    copy paste html codenya.
    Terakhir simpan template…

    begitulah template yang saya pilih

    Jangan lupa koment!!!!!!!!!

    Mengubah blog nofollow menjadi dofollow

    Posted on

    Udah pada tahu lum status blog kamu dofollow atau nofollow, coba cek dengan cara masuk ke blogger>Tata letak>Edit html  jangan lupa untuk mencentang expand template widget, setelah itu cari kode yang hampir mirip dengan ini, syukur-syukur mirip banget (‘data:comment.authorUrl’ rel=”nofollow) dengan cara menekan (ctrl+f) , setelah ketemu, coba lihat apakah pada blog kamu dofollow ataukah masih nofollow.
    Sebelum melanjut postingan, apa sih sebenarnya blog nofollow dan apa juga yang dimaksud blog dofollow itu, berikut penjelasannya
    Dofollow artinya link yang dimasukkan pada saat memberikan komentar pada sebuah postingan dari sebuah blog akan ditelusuri lebih lanjut oleh search engine atau mesin pencari (crawler), dalam artian mendapatkan backlink dari blog yang di komentari tersebut.

    Nofollow adalah kebalikan dari dofollow, link yang dimasukkan pada saat memberikan komentar pada postingan sebuah blog tidak akan ditelusuri lebih lanjut oleh search engine, sehingga kita tidak mendapatkan backlink dari blog yang dikomentari tersebut. Sementara kita tahu backlink merupakan salah satu unsur penting dalam meningkatkan pagerank.

    Nah, udah pada tahukan, sehingga kita mesti berkomentar sebanyak-banyaknya pada blog dofollow, tapi dengan catatan, berkomentarlah sesuai dengan topik yang dibahas & jangan melakukan spam.
    Keuntungan blog ber Dofollow :
    – Blog kita akan dicari oleh blogger pencari blog dofollow, sehingga meningkatkan traffic blog.
    – Postingan kita akan mendapatkan banyak komentar
    – Dengan komentar yang banyak, kita akan kelihatan eksis

    Kekurangan blog yang ber Dofollow :
    – Blog kita bisa didatangi komentar sampah atau spam

    Kelebihan blog yang ber Nofollow :
    – Blog kita tidak akan berisikan komentar spam

    Kekurangan blog yang ber Nofollow :
    – Sedikit sulit untuk mendapatkan backlink
    – Sedikit komentar pada blog anda

    Nah, setelah tahu kelebihan & kekurangan dari blog nofollow maupun dofollow sekarang terserah kamu mau yang do atau no. Kalau kamu pingin merubah dari no menjadi do, ikuti caranya di bawah ini :
    1. Cari kode  (‘data:comment.authorUrl’ rel=”nofollow) (sama seperti di atas, tentunya pada menu edit html, expand template widgetnya jangan lupa dicentang)
    2. Ganti tulisan nofollow (yang bercetak merah) menjadi dofollow, nah selesai sudah, gampang kan, jangan lupa klik simpan template setelah selesai. 

    Selamat Mencoba 

    Basic hardware components

    Posted on Updated on

    All networks are made up of basic hardware building blocks to interconnect network nodes, such as Network Interface Cards (NICs), Bridges, Hubs, Switches, and Routers. In addition, some method of connecting these building blocks is required, usually in the form of galvanic cable (most commonly Category 5 cable). Less common are microwave links (as in IEEE 802.12) or optical cable (“optical fiber”).

    Network interface cards

    A network card, network adapter, or NIC (network interface card) is a piece of computer hardware designed to allow computers to communicate over a computer network. It provides physical access to a networking medium and often provides a low-level addressing system through the use of MAC addresses.


    A repeater is an electronic device that receives a signal, cleans it of unnecessary noise, regenerates it, and retransmits it at a higher power level, or to the other side of an obstruction, so that the signal can cover longer distances without degradation. In most twisted pair Ethernet configurations, repeaters are required for cable that runs longer than 100 meters. Repeaters work on the Physical Layer of the OSI model.


    A network hub contains multiple ports. When a packet arrives at one port, it is copied unmodified to all ports of the hub for transmission. The destination address in the frame is not changed to a broadcast address.[7] It works on the Physical Layer of the OSI model.


    A network bridge connects multiple network segments at the data link layer (layer 2) of the OSI model. Bridges do send broadcasts to all ports except the one on which the broadcast was received. However, bridges do not promiscuously copy traffic to all ports, as hubs do, but learn which MAC addresses are reachable through specific ports. Once the bridge associates a port and an address, it will send traffic for that address to that port only.

    Bridges learn the association of ports and addresses by examining the source address of frames that it sees on various ports. Once a frame arrives through a port, its source address is stored and the bridge assumes that MAC address is associated with that port. The first time that a previously unknown destination address is seen, the bridge will forward the frame to all ports other than the one on which the frame arrived.

    Bridges come in three basic types:

    * Local bridges: Directly connect local area networks (LANs)
    * Remote bridges: Can be used to create a wide area network (WAN) link between LANs. Remote bridges, where the connecting link is slower than the end networks, largely have been replaced with routers.
    * Wireless bridges: Can be used to join LANs or connect remote stations to LANs.


    A network switch is a device that forwards and filters OSI layer 2 datagrams (chunk of data communication) between ports (connected cables) based on the MAC addresses in the packets.[8] is distinct from a hub in that it only forwards the frames to the ports involved in the communication rather than all ports connected. A switch breaks the collision domain but represents itself as a broadcast domain. Switches make forwarding decisions of frames on the basis of MAC addresses. A switch normally has numerous ports, facilitating a star topology for devices, and cascading additional switches.[9] Some switches are capable of routing based on Layer 3 addressing or additional logical levels; these are called multi-layer switches. The term switch is used loosely in marketing to encompass devices including routers and bridges, as well as devices that may distribute traffic on load or by application content (e.g., a Web URL identifier).


    A router is an internetworking device that forwards packets between networks by processing information found in the datagram or packet (Internet protocol information from Layer 3 of the OSI Model). In many situations, this information is processed in conjunction with the routing table (also known as forwarding table). Routers use routing tables to determine what interface to forward packets (this can include the “null” also known as the “black hole” interface because data can go into it, however, no further processing is done for said data).